答复: Problem with luftboot on Lisa M 2.1

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

答复: Problem with luftboot on Lisa M 2.1

banditniu
Thanks anyway!I wonder if ican flah the
Older luftboot into the board,if can ,where can I find it?

发自我的 Windows Phone

发件人: Felix Ruess
发送时间: 2014/12/19 22:47
收件人: Paparazzi UAV devel list
主题: Re: [Paparazzi-devel] Problem with luftboot on Lisa M 2.1

I honestly don't know and as I wrote previously I can't test this since I currently don't have an autopilot with luftboot bootloader...

On Fri, Dec 19, 2014 at 2:37 PM, banditniu <[hidden email]> wrote:
Hi flixr,
Unfortunatelly met the problem as Michal said
(seehttp://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-td16468.html).So
is there a way to sovle this bug? Thanks a lot!



--
View this message in context: http://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-tp16468p16554.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Reply | Threaded
Open this post in threaded view
|

Re: 答复: Problem with luftboot on Lisa M 2.1

flixr
Administrator
Hi guys,

if you haven't seen it yet, this should be fixed in lastest v5.3 and master.
Was a bug in libopencm3, see also https://github.com/paparazzi/paparazzi/pull/1058

Cheers, Felix

On Fri, Dec 19, 2014 at 6:26 PM, 牛志强 <[hidden email]> wrote:
Thanks anyway!I wonder if ican flah the
Older luftboot into the board,if can ,where can I find it?

发自我的 Windows Phone

发件人: Felix Ruess
发送时间: 2014/12/19 22:47
收件人: Paparazzi UAV devel list
主题: Re: [Paparazzi-devel] Problem with luftboot on Lisa M 2.1


I honestly don't know and as I wrote previously I can't test this since I currently don't have an autopilot with luftboot bootloader...

On Fri, Dec 19, 2014 at 2:37 PM, banditniu <[hidden email]> wrote:
Hi flixr,
Unfortunatelly met the problem as Michal said
(seehttp://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-td16468.html).So
is there a way to sovle this bug? Thanks a lot!



--
View this message in context: http://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-tp16468p16554.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Reply | Threaded
Open this post in threaded view
|

Re: 答复: Problem with luftboot on Lisa M 2.1

banditniu
In reply to this post by banditniu
OK,Thanks very much,I’ll test it soon,when finished ,I’ll report the result to you!

发自 Windows 邮件

发件人: [hidden email]
发送时间: ‎2015‎年‎1‎月‎4‎日, ‎星期日 ‎23‎:‎52
收件人: [hidden email]

Hi guys,

if you haven't seen it yet, this should be fixed in lastest v5.3 and master.
Was a bug in libopencm3, see also https://github.com/paparazzi/paparazzi/pull/1058

Cheers, Felix

On Fri, Dec 19, 2014 at 6:26 PM, 牛志强 <[hidden email]> wrote:
Thanks anyway!I wonder if ican flah the
Older luftboot into the board,if can ,where can I find it?

发自我的 Windows Phone

发件人: Felix Ruess
发送时间: 2014/12/19 22:47
收件人: Paparazzi UAV devel list
主题: Re: [Paparazzi-devel] Problem with luftboot on Lisa M 2.1


I honestly don't know and as I wrote previously I can't test this since I currently don't have an autopilot with luftboot bootloader...

On Fri, Dec 19, 2014 at 2:37 PM, banditniu <[hidden email]> wrote:
Hi flixr,
Unfortunatelly met the problem as Michal said
(seehttp://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-td16468.html).So
is there a way to sovle this bug? Thanks a lot!



--
View this message in context: http://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-tp16468p16554.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Reply | Threaded
Open this post in threaded view
|

Re: 答复: Problem with luftboot on Lisa M 2.1

banditniu
In reply to this post by banditniu
BTW,should I reflash the luftboot into lisa board?

发自 Windows 邮件

发件人: [hidden email]
发送时间: ‎2015‎年‎1‎月‎4‎日, ‎星期日 ‎23‎:‎52
收件人: [hidden email]

Hi guys,

if you haven't seen it yet, this should be fixed in lastest v5.3 and master.
Was a bug in libopencm3, see also https://github.com/paparazzi/paparazzi/pull/1058

Cheers, Felix

On Fri, Dec 19, 2014 at 6:26 PM, 牛志强 <[hidden email]> wrote:
Thanks anyway!I wonder if ican flah the
Older luftboot into the board,if can ,where can I find it?

发自我的 Windows Phone

发件人: Felix Ruess
发送时间: 2014/12/19 22:47
收件人: Paparazzi UAV devel list
主题: Re: [Paparazzi-devel] Problem with luftboot on Lisa M 2.1


I honestly don't know and as I wrote previously I can't test this since I currently don't have an autopilot with luftboot bootloader...

On Fri, Dec 19, 2014 at 2:37 PM, banditniu <[hidden email]> wrote:
Hi flixr,
Unfortunatelly met the problem as Michal said
(seehttp://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-td16468.html).So
is there a way to sovle this bug? Thanks a lot!



--
View this message in context: http://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-tp16468p16554.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Reply | Threaded
Open this post in threaded view
|

Re: 答复: Problem with luftboot on Lisa M 2.1

banditniu
In reply to this post by flixr
There are some errors after  call git checkout v5.3  and call make in terminal as follows:

root@bandit-Aspire-E1-472G:/home/bandit/paparazzi# make
------------------------------------------------------------
Building Paparazzi version v5.3.3_testing-0-g3e61629-dirty
------------------------------------------------------------
make -C data/maps
-----------------------------------------------
DOWNLOAD: google maps version code
Could not download google maps version code
-----------------------------------------------
make[1]: *** [/home/bandit/paparazzi/conf/maps_data/maps.google.com] 错误 1
make: [update_google_version] 错误 2 (忽略)
[ -L conf/control_panel.xml ] || [ -f conf/control_panel.xml ] || cp conf/control_panel_example.xml conf/control_panel.xml
make -C sw/lib/ocaml
OCY expr_parser.mly
OCL expr_lexer.mll
40 states, 423 transitions, table size 1932 bytes
DEPEND .depend
OC fig.mli
OC fig.ml
OC debug.mli
OC debug.ml
OC base64.mli
OC base64.ml
OC serial.mli
OC serial.ml
OC ocaml_tools.mli
OC ocaml_tools.ml
OC expr_syntax.mli
OC expr_syntax.ml
OC expr_parser.mli
OC expr_parser.ml
OC expr_lexer.ml
OC extXml.mli
...
...
make -C sw/ext
  GENHDR  include/libopencm3/stm32/f4/irq.json
  GENHDR  include/libopencm3/stm32/f1/irq.json
  GENHDR  include/libopencm3/stm32/f2/irq.json
  GENHDR  include/libopencm3/stm32/f3/irq.json
  GENHDR  include/libopencm3/stm32/f0/irq.json
  GENHDR  include/libopencm3/stm32/l0/irq.json
  GENHDR  include/libopencm3/stm32/l1/irq.json
  GENHDR  include/libopencm3/lpc13xx/irq.json
  GENHDR  include/libopencm3/lm3s/irq.json
  GENHDR  include/libopencm3/vf6xx/irq.json
  GENHDR  include/libopencm3/efm32/efm32tg/irq.json
  GENHDR  include/libopencm3/efm32/efm32lg/irq.json
  GENHDR  include/libopencm3/efm32/efm32gg/irq.json
  GENHDR  include/libopencm3/efm32/efm32g/irq.json
  GENHDR  include/libopencm3/sam/3a/irq.json
  GENHDR  include/libopencm3/sam/3s/irq.json
  GENHDR  include/libopencm3/sam/3n/irq.json
  GENHDR  include/libopencm3/sam/3u/irq.json
  GENHDR  include/libopencm3/sam/3x/irq.json
  GENHDR  include/libopencm3/lpc43xx/m4/irq.json
  GENHDR  include/libopencm3/lpc43xx/m0/irq.json
  GENHDR  include/libopencm3/lpc17xx/irq.json
  BUILD   lib/stm32/f1
  CP      libopencm3_stm32f1.ld
  CC      adc.c
  CC      adc_common_v1.c
  CC      can.c
  CC      desig.c
  CC      ethernet.c
  CC      flash.c
  CC      gpio.c
  CC      rcc.c
  CC      rtc.c
  CC      timer.c
  CC      crc_common_all.c
  CC      dac_common_all.c
  CC      dma_common_l1f013.c
  CC      gpio_common_all.c
  CC      i2c_common_all.c
  CC      iwdg_common_all.c
  CC      pwr_common_all.c
  CC      spi_common_all.c
  CC      spi_common_l1f124.c
  CC      timer_common_all.c
  CC      usart_common_all.c
  CC      usart_common_f124.c
  CC      rcc_common_all.c
  CC      exti_common_all.c
  CC      flash_common_f01.c
  CC      usb.c
  CC      usb_control.c
  CC      usb_standard.c
../../usb/usb_standard.c: In function 'build_config_descriptor':
../../usb/usb_standard.c:108:11: error: 'const struct usb_endpoint_descriptor' has no member named 'extra'
     if (ep->extra) {
           ^
../../usb/usb_standard.c:109:20: error: 'const struct usb_endpoint_descriptor' has no member named 'extra'
      memcpy(buf, ep->extra,
                    ^
In file included from ../../usb/usb_standard.c:34:0:
../../usb/usb_standard.c:110:32: error: 'const struct usb_endpoint_descriptor' has no member named 'extralen'
             count = MIN(len, ep->extralen));
                                ^
../../usb/usb_private.h:44:27: note: in definition of macro 'MIN'
 #define MIN(a, b) ((a) < (b) ? (a) : (b))
                           ^
../../usb/usb_standard.c:110:32: error: 'const struct usb_endpoint_descriptor' has no member named 'extralen'
             count = MIN(len, ep->extralen));
                                ^
../../usb/usb_private.h:44:39: note: in definition of macro 'MIN'
 #define MIN(a, b) ((a) < (b) ? (a) : (b))
                                       ^
../../usb/usb_standard.c:114:20: error: 'const struct usb_endpoint_descriptor' has no member named 'extralen'
      totallen += ep->extralen;
                    ^
make[3]: *** [usb_standard.o] 错误 1
make[2]: *** [lib/stm32/f1] 错误 2
make[1]: *** [libopencm3.module] 错误 2
make: *** [ext] 错误 2
root@bandit-Aspire-E1-472G:/home/bandit/paparazzi# ^C
root@bandit-Aspire-E1-472G:/home/bandit/paparazzi#




Reply | Threaded
Open this post in threaded view
|

Re: 答复: Problem with luftboot on Lisa M 2.1

flixr
Administrator
Run a make clean first, then make again.

In any case you should pull the latest v5.3, you are on v5.3.3_testing-0-g3e61629 but luftboot was updated in v5.3.3_testing-12-g334eec6

On Mon, Jan 5, 2015 at 9:33 AM, banditniu <[hidden email]> wrote:
There are some errors after  call git checkout v5.3  and call make in
terminal as follows:

/root@bandit-Aspire-E1-472G:/home/bandit/paparazzi# make
------------------------------------------------------------
Building Paparazzi version v5.3.3_testing-0-g3e61629-dirty
------------------------------------------------------------
make -C data/maps
-----------------------------------------------
DOWNLOAD: google maps version code
Could not download google maps version code
-----------------------------------------------
make[1]: *** [/home/bandit/paparazzi/conf/maps_data/maps.google.com] 错误 1
make: [update_google_version] 错误 2 (忽略)
[ -L conf/control_panel.xml ] || [ -f conf/control_panel.xml ] || cp
conf/control_panel_example.xml conf/control_panel.xml
make -C sw/lib/ocaml
OCY expr_parser.mly
OCL expr_lexer.mll
40 states, 423 transitions, table size 1932 bytes
DEPEND .depend
OC fig.mli
OC fig.ml
OC debug.mli
OC debug.ml
OC base64.mli
OC base64.ml
OC serial.mli
OC serial.ml
OC ocaml_tools.mli
OC ocaml_tools.ml
OC expr_syntax.mli
OC expr_syntax.ml
OC expr_parser.mli
OC expr_parser.ml
OC expr_lexer.ml
OC extXml.mli
...
...
make -C sw/ext
  GENHDR  include/libopencm3/stm32/f4/irq.json
  GENHDR  include/libopencm3/stm32/f1/irq.json
  GENHDR  include/libopencm3/stm32/f2/irq.json
  GENHDR  include/libopencm3/stm32/f3/irq.json
  GENHDR  include/libopencm3/stm32/f0/irq.json
  GENHDR  include/libopencm3/stm32/l0/irq.json
  GENHDR  include/libopencm3/stm32/l1/irq.json
  GENHDR  include/libopencm3/lpc13xx/irq.json
  GENHDR  include/libopencm3/lm3s/irq.json
  GENHDR  include/libopencm3/vf6xx/irq.json
  GENHDR  include/libopencm3/efm32/efm32tg/irq.json
  GENHDR  include/libopencm3/efm32/efm32lg/irq.json
  GENHDR  include/libopencm3/efm32/efm32gg/irq.json
  GENHDR  include/libopencm3/efm32/efm32g/irq.json
  GENHDR  include/libopencm3/sam/3a/irq.json
  GENHDR  include/libopencm3/sam/3s/irq.json
  GENHDR  include/libopencm3/sam/3n/irq.json
  GENHDR  include/libopencm3/sam/3u/irq.json
  GENHDR  include/libopencm3/sam/3x/irq.json
  GENHDR  include/libopencm3/lpc43xx/m4/irq.json
  GENHDR  include/libopencm3/lpc43xx/m0/irq.json
  GENHDR  include/libopencm3/lpc17xx/irq.json
  BUILD   lib/stm32/f1
  CP      libopencm3_stm32f1.ld
  CC      adc.c
  CC      adc_common_v1.c
  CC      can.c
  CC      desig.c
  CC      ethernet.c
  CC      flash.c
  CC      gpio.c
  CC      rcc.c
  CC      rtc.c
  CC      timer.c
  CC      crc_common_all.c
  CC      dac_common_all.c
  CC      dma_common_l1f013.c
  CC      gpio_common_all.c
  CC      i2c_common_all.c
  CC      iwdg_common_all.c
  CC      pwr_common_all.c
  CC      spi_common_all.c
  CC      spi_common_l1f124.c
  CC      timer_common_all.c
  CC      usart_common_all.c
  CC      usart_common_f124.c
  CC      rcc_common_all.c
  CC      exti_common_all.c
  CC      flash_common_f01.c
  CC      usb.c
  CC      usb_control.c
  CC      usb_standard.c
../../usb/usb_standard.c: In function 'build_config_descriptor':
../../usb/usb_standard.c:108:11: error: 'const struct
usb_endpoint_descriptor' has no member named 'extra'
     if (ep->extra) {
           ^
../../usb/usb_standard.c:109:20: error: 'const struct
usb_endpoint_descriptor' has no member named 'extra'
      memcpy(buf, ep->extra,
                    ^
In file included from ../../usb/usb_standard.c:34:0:
../../usb/usb_standard.c:110:32: error: 'const struct
usb_endpoint_descriptor' has no member named 'extralen'
             count = MIN(len, ep->extralen));
                                ^
../../usb/usb_private.h:44:27: note: in definition of macro 'MIN'
 #define MIN(a, b) ((a) < (b) ? (a) : (b))
                           ^
../../usb/usb_standard.c:110:32: error: 'const struct
usb_endpoint_descriptor' has no member named 'extralen'
             count = MIN(len, ep->extralen));
                                ^
../../usb/usb_private.h:44:39: note: in definition of macro 'MIN'
 #define MIN(a, b) ((a) < (b) ? (a) : (b))
                                       ^
../../usb/usb_standard.c:114:20: error: 'const struct
usb_endpoint_descriptor' has no member named 'extralen'
      totallen += ep->extralen;
                    ^
make[3]: *** [usb_standard.o] 错误 1
make[2]: *** [lib/stm32/f1] 错误 2
make[1]: *** [libopencm3.module] 错误 2
make: *** [ext] 错误 2
root@bandit-Aspire-E1-472G:/home/bandit/paparazzi# ^C
root@bandit-Aspire-E1-472G:/home/bandit/paparazzi#
/







--
View this message in context: http://lists.paparazziuav.org/Problem-with-luftboot-on-Lisa-M-2-1-tp16558p16604.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
Reply | Threaded
Open this post in threaded view
|

Re: 答复: Problem with luftboot on Lisa M 2.1

banditniu
Finally I made it by reinstalling paparazzi software!Thanks! HERE is the report:
At first,I couldn't check cranch v5.3 and don't exactly know the reason. I reinstalled ppz software and checked to v5.3 branch
.Then I reflashed luftboot by jlink v8 into my board and successfully uploaded 'ap.hex' into lisa m.

flash luftboot complete:
root@bandit-Aspire-E1-472G:/home/bandit/paparazzi/sw/ext/luftboot/src# make flash DEV_SERIAL="LM2-020"
  OOCD  luftboot.hex
Open On-Chip Debugger 0.9.0-dev-00209-gc3ec194 (2014-12-12-18:33)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.sourceforge.net/doc/doxygen/bugs.html
Error: session's transport is not selected.
Info : session transport was not selected, defaulting to JTAG
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
cortex_m reset_config sysresetreq
Info : J-Link ARM V8 compiled Jan 31 2018 18:34:52
Info : J-Link caps 0xb9ff7bbf
Info : J-Link hw version 80000
Info : J-Link hw type J-Link
Info : J-Link max mem block 8368
Info : J-Link configuration
Info : USB-Address: 0x0
Info : Kickstart power on JTAG-pin 19: 0x0
Info : Vref = 3.325 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 1 TRST = 1
Info : J-Link JTAG Interface ready
Info : clock speed 1000 kHz
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x06418041 (mfg: 0x020, part: 0x6418, ver: 0x0)
Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints
Error: stm32f1x.cpu -- clearing lockup after double fault
Polling target stm32f1x.cpu failed, GDB will be halted. Polling again in 100ms
Polling target stm32f1x.cpu succeeded again, trying to reexamine
Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x06418041 (mfg: 0x020, part: 0x6418, ver: 0x0)
target state: halted
target halted due to debug-request, current mode: Handler HardFault
xPSR: 0x01000003 pc: 0x08001732 msp: 0x20004fe0
auto erase enabled
Info : device id = 0x10016418
Info : flash size = 256kbytes
Info : Padding image section 0 with 1632 bytes
wrote 8192 bytes from file luftboot.hex in 0.412694s (19.385 KiB/s)
Info : JTAG tap: stm32f1x.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3)
Info : JTAG tap: stm32f1x.bs tap/device found: 0x06418041 (mfg: 0x020, part: 0x6418, ver: 0x0)
target state: halted
target halted due to breakpoint, current mode: Handler HardFault
xPSR: 0x61000003 pc: 0x2000003a msp: 0x20004fe0
shutdown command invoked
root@bandit-Aspire-E1-472G:/home/bandit/paparazzi/sw/ext/luftboot/src#



upload ap.hex succed:

RUN 'make -C /home/bandit/paparazzi -f Makefile.ac AIRCRAFT=Quad_LisaM_2  ap.upload '
make: Entering directory `/home/bandit/paparazzi'
-----------------------------------------------------------------------
Paparazzi version v5.3.3_testing-18-g8a4d3d7-dirty
-----------------------------------------------------------------------
#######################################
# BUILD AIRCRAFT=Quad_LisaM_2, TARGET ap
#######################################
make[1]: Entering directory `/home/bandit/paparazzi'
GENERATE autopilots in /home/bandit/paparazzi/var/aircrafts/Quad_LisaM_2/ap/generated/
make[1]: Leaving directory `/home/bandit/paparazzi'
make[1]: Entering directory `/home/bandit/paparazzi'
make[1]: Nothing to be done for `radio_ac_h'.
make[1]: Leaving directory `/home/bandit/paparazzi'
make[1]: Entering directory `/home/bandit/paparazzi'
make[1]: Nothing to be done for `flight_plan_ac_h'.
make[1]: Leaving directory `/home/bandit/paparazzi'
cd sw/airborne; make -j4 TARGET=ap all
Using "arch/stm32/lisa-m.ld" as ldscript for target "ap".
make[1]: Entering directory `/home/bandit/paparazzi/sw/airborne'

GCC version: arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.9.3 20141119 (release) [ARM/embedded-4_9-branch revision 218278]


Previous size:
/home/bandit/paparazzi/var/aircrafts/Quad_LisaM_2/ap/ap.elf  :
section              size         addr
.text             0x1a50c    0x8002000
.ARM.exidx            0x8    0x801c50c
.data              0x4484   0x20000000
.bss               0x1c20   0x20004488
.debug_info       0x403f5          0x0
.debug_abbrev      0xa079          0x0
.debug_loc        0x153c0          0x0
.debug_aranges     0x2180          0x0
.debug_ranges      0x31a8          0x0
.debug_line       0x10029          0x0
.debug_str         0xa7b3          0x0
.comment             0x70          0x0
.ARM.attributes      0x31          0x0
.debug_frame       0x6fe0          0x0
Total             0xa696b



Current size:
/home/bandit/paparazzi/var/aircrafts/Quad_LisaM_2/ap/ap.elf  :
section              size         addr
.text             0x1a50c    0x8002000
.ARM.exidx            0x8    0x801c50c
.data              0x4484   0x20000000
.bss               0x1c20   0x20004488
.debug_info       0x403f5          0x0
.debug_abbrev      0xa079          0x0
.debug_loc        0x153c0          0x0
.debug_aranges     0x2180          0x0
.debug_ranges      0x31a8          0x0
.debug_line       0x10029          0x0
.debug_str         0xa7b3          0x0
.comment             0x70          0x0
.ARM.attributes      0x31          0x0
.debug_frame       0x6fe0          0x0
Total             0xa696b


make[1]: Leaving directory `/home/bandit/paparazzi/sw/airborne'
cd sw/airborne; make TARGET=ap upload
Using "arch/stm32/lisa-m.ld" as ldscript for target "ap".
make[1]: Entering directory `/home/bandit/paparazzi/sw/airborne'
Using stm32 mem dfu loader
/usr/bin/python /home/bandit/paparazzi/sw/tools/dfu/stm32_mem.py   /home/bandit/paparazzi/var/aircrafts/Quad_LisaM_2/ap/ap.bin

Using device 007: ID 1d50:600f Transition Robotics Inc. - Lisa/M (Upgrade) V1.1 - NSERIAL 31FFD4054248363561400343
Programming memory from 0x08002000...
[0%=====================50%=====================100%]
 ##################################################
All operations complete!
make[1]: Leaving directory `/home/bandit/paparazzi/sw/airborne'
make: Leaving directory `/home/bandit/paparazzi'

DONE 'make -C /home/bandit/paparazzi -f Makefile.ac AIRCRAFT=Quad_LisaM_2  ap.upload'




CHEERS FLIXR!