Introduction to the G0 GPS

Le 22 mars 2016 à 04:31, Piotr Esden-Tempski <[hidden email]> a écrit :

Dear Paparazzians,

After a three week pause I finally found some time to work on another installment of my YouTube videos. This time I am talking about the G0 GPS and the design decisions we made while designing it.

https://www.youtube.com/watch?v=TG-2z-KdJEI

I hope you like it and find the video to be useful. If you think so, make sure to give me a like on YouTube, and make sure to subscribe.

As a side note, the Elle0 autopilot and G0 GPS are now finally in stock at the German 1BitSquared store too: http://1bitsquared.de/products/elle0-autopilot & http://1bitsquared.de/products/g0-gps

I am looking forward to see your Elle avionics based UAV projects. I am posting every day on instagram (https://www.instagram.com/1bitsquared/, https://www.instagram.com/paparazziuav/) and on twitter (https://twitter.com/1bitsquared, https://twitter.com/paparazziuav) sharing the Paparazzi UAV love. If you have a Paparazzi UAV based project you are working on make sure to tag @paparazziuav and @1bitsquared in your instagram and twitter posts. I would love to see them and share them with everyone. :)

Cheers,

Piotr Esden-Tempski

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

Le 6 avr. 2016 à 11:54, Helge Walle <[hidden email]> a écrit :

Hi Nicolas,

I hope it is ok that I give an input on this.

My Elle0 is running fine with a ppm receiver. Currently I use a Robbe R6107SP Rx, and my Tx is a Futaba 10C.

Attached is a simple bitmap drawing I made of how I connected my equipment for use in a fixed wing plane.

Helge.

2016-04-06 16:07 GMT+02:00 Nicolas Quendez <[hidden email]>:

Dear Piotr,

I wish to order you few Elle0 APs. 

I have just one question : is it OK to use it without any Spektrum receiver ? With any other PPM receiver ? 

Because for lisa S boards, I was never able to use them without Spektrum receiver, because the binding process is mandatry to make it work. I need some AP like Lisa M that work with any PPM receiver, or even without ant receiver on it. ElleO is OK for that ? 

Thanks in advance

Best regards

Nicolas

Le 22 mars 2016 à 04:31, Piotr Esden-Tempski <[hidden email]> a écrit :

Dear Paparazzians,

After a three week pause I finally found some time to work on another installment of my YouTube videos. This time I am talking about the G0 GPS and the design decisions we made while designing it.

https://www.youtube.com/watch?v=TG-2z-KdJEI

I hope you like it and find the video to be useful. If you think so, make sure to give me a like on YouTube, and make sure to subscribe.

As a side note, the Elle0 autopilot and G0 GPS are now finally in stock at the German 1BitSquared store too: http://1bitsquared.de/products/elle0-autopilot & http://1bitsquared.de/products/g0-gps

I am looking forward to see your Elle avionics based UAV projects. I am posting every day on instagram (https://www.instagram.com/1bitsquared/, https://www.instagram.com/paparazziuav/) and on twitter (https://twitter.com/1bitsquared, https://twitter.com/paparazziuav) sharing the Paparazzi UAV love. If you have a Paparazzi UAV based project you are working on make sure to tag @paparazziuav and @1bitsquared in your instagram and twitter posts. I would love to see them and share them with everyone. :)

Cheers,

Piotr Esden-Tempski

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

<diagram_Elle0_v1.bmp>_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel