Installing Paparazzi on the Raspberry Pi 2

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Installing Paparazzi on the Raspberry Pi 2

ismailsen
I successfully installed Paparazzi in a Ubuntu 14.04 trusty on raspberry pi 2.
 
When I follow the HowTo I can upload the compiled code and it's starting GCS. But GCS is black, while in the infobox just write: "Waiting for telemetry..."

I am having trouble with ardrone2_raw in the same situation.



Thank you in advance for your answer.
Reply | Threaded
Open this post in threaded view
|

Re: Installing Paparazzi on the Raspberry Pi 2

flixr
Administrator
Does the ivy communication on the Pi work on general (e.g. in simulation)?
Did you check if you get packets from the ARDrone on the UDP port (default is 4242)?

On Sat, Apr 4, 2015 at 1:18 AM, ismailsen <[hidden email]> wrote:
I successfully installed Paparazzi in a Ubuntu 14.04 trusty on raspberry pi
2.

When I follow the HowTo I can upload the compiled code and it's starting
GCS. But GCS is black, while in the infobox just write: "Waiting for
telemetry..."

I am having trouble with ardrone2_raw in the same situation.

<http://lists.paparazziuav.org/file/n16942/paparazzierror.png>

Thank you in advance for your answer.




--
View this message in context: http://lists.paparazziuav.org/Installing-Paparazzi-on-the-Raspberry-Pi-2-tp16942.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel